品牌：RETZ/我們一直致力于流體控制和測控領域的持續創新，始于2005……電動調節球閥是由作用力16Nm,24Nm或32Nm電動執行器與口徑DN65~DN150電動球閥體組合而成的系列電動調節球閥，可AC24V±10%50/60Hz;也可以采用AC220±10%50/60Hz;另有多種控制信號，0~10VDC或4~20mA信號控制，并提供0~10VDC的位置反饋信號。其廣泛應用于空調、制冷、采暖以及其它樓宇自動控制系統中，可精確調節系統中的介質流量，從而達到控制溫度、濕度、壓力和節能的目的。Retz The electric regulating ball valve is a series of electric regulating ball valves composed of an electric actuator with a force of 16Nm, 24Nm, or 32Nm and an electric ball valve body with a diameter of DN65~DN150. It can AC24V ± 10% 50/60Hz; AC220 ± 10% 50/60Hz can also be used; There are also various control signals, including 0-10VDC or 4-20mA signal control, and provide 0-10VDC position feedback signals. It is widely used in air conditioning, refrigeration, heating, and other building automatic control systems, and can accurately adjust the medium flow rate in the system, thereby achieving the goal of controlling temperature, humidity, pressure, and energy conservation.

進口進口電動調節球閥性能特點∶ Performance characteristics

等百分比流量特性閥體整體設計，零泄漏量。執行器可4個方向裝配，更易于接線和保養，內置兩個浮球的輔助開關具有到位斷電功能，電機壽命更長。可通過按鈕手動控制旋轉角度，執行器拆、裝簡便，可在設備、管道安裝完畢后再裝。

進口進口電動調節球閥選型參數

連接口徑：法蘭  F2-1/2- G6"

公稱壓力：16Bar Nominal pressure: 16bar

介質溫度：2~90℃  Medium temperature: 2 ~ 90 ℃

環境溫度：2~40℃  Ambient temperature: 2 ~ 40 ℃

流量特性∶等百分比特性曲線 Flow characteristic: equal percentage characteristic curve

驅動電源：AC24V，DC24V，AC220V 50/60Hz  Drive power supply:AC24V，DC24V，AC220V 50/60Hz

功率消耗：6.5VA  Power consumption: 6.5va

關閉壓差∶ 600KPa  Closing pressure difference: 600kpa

運行模式：三態浮點或開/關

電源電壓：AC220V.AC24V

閥門動作時間：16Nm 24Nm 32Nm

輸出力矩：開啟時間：40s~200s關閉時間：40s~200s

適用介質：冷、熱水或30%乙二醇溶液  Applicable medium: cold, hot water or 30% ethylene glycol solution

零部件材質 Component material

閥體：球墨鑄鐵  Valve body: ductile iron

閥座：PTFE  Valve seat: PTFE

球芯：不銹鋼304  Ball core: stainless steel 304

閥軸：不銹鋼304  Valve shaft: stainless steel 304

密封圈：NBR  Sealing ring: NBR

進口進口電動調節球閥安裝說明 Installation instructions

由于球閥和驅動器是分體式的，可在管道上裝好球閥后再安裝驅動器。為了調試方便，應了解球體在閥體內的啟閉狀況，因此閥桿頂端平面刻有一字槽，其方向與球體通孔方向一致。另外，在安裝驅動器時，驅動器方孔內的軸銷要與閥桿的性安裝記號槽方向一致，安裝時請按閥體標示的流向方向安裝；在所配用型號驅動器的包裝盒內的說明書上，詳細說明了安裝連接方法  RETZ ball valve and the driver are split, the driver can be installed after the ball valve is installed on the pipeline. In order to facilitate debugging, it is necessary to understand the opening and closing conditions of the ball in the valve body. Therefore, the top plane of the valve stem is engraved with a slot, whose direction is consistent with the direction of the ball through hole. In addition, when installing the driver, the shaft pin in the square hole of the driver shall be consistent with the direction of the unique installation mark groove of the valve stem. Please install it according to the flow direction marked on the valve body; The installation and connection methods are described in detail in the instructions in the packaging box of the matched driver. The ball valve can be installed horizontally or vertically, but cannot be installed upside down.

球閥可水平裝，也可以垂直安裝，但不能倒轉朝下安裝  The ball valve can be installed horizontally or vertically, but cannot be installed upside dow

富林克致力于作為流體控制專家，負責中國地區RETZ產品的營銷管理和服務，從而創造價值的企業，RETZ以“堅持更好的品質”為根本，以“持續實現具有創造性、高品質產品和服務的企業價值，為當今社會的繁榮作出貢獻”為企業理念